PL-211 Parts Adjustment

Parts adjustment for conveyor adjustment, conveyor height adjustment, wrap around belt adjustment, and label press piece adjustment



1. Conveyor adjustment: To adjust the tension of the conveyor belt, loosen the two nuts on the screws. Turn counter clockwise to loosen and clockwise to tighten. Make sure the conveyor is centered to reduce any noise. See A.


2. Conveyor height adjustment: 
Loosen the fixed screws, adjust the conveyor to the appropriate height and tighten screws again.


3. Wrap around belt adjustment:
 To adjust the tension and centering the belt, adjust screw A. When adjusting, use only small increments and let the belt run to determine the final position. A non-centered belt will slip up or down.


4. Label press piece adjustment:
 First, loosen screw (A) turn the rod (2) counter clockwise and hold it. Use your other hand to tighten screw A and then release it.