ELF-50
      Back to home
      1. Help Center
      2. Wrap Around
      3. ELF-50

      ELF-50 Label Length Cannot be Set

      Solutions to set the label length

      PLDR_DiagonalLine

      A. LABEL SENSOR WAS NOT ADJUSTED PROPERLY

      1. Inspect the condition of the label sensor. Please refer to "Sensitivity adjusting instruction of label sensor" section.

      2. If label length still cannot be set, replace the label sensor.

      B.STEPPING MOTOR DOES NOT WORK

      1. Inspect that the wires are properly connected. If the wires are not connected, please connect them and reset the labeling applicator.

      2. If the problem is not in the wiring, please contact Pack Leader USA.