ELF-20 Adjusting Parts

Conveyor adjustment, conveyor height adjustment, and guid rail adjustment screws



1. Conveyor adjustment:

To adjust the tightness of the conveyor belt, turn the two screws. Turn counter clockwise to loosen and clockwise to tighten. Make sure the conveyor is centered. If not it can cause the belt to wear prematurely.

2. Conveyor height adjustment:

Adjust the four footing screw to adjust conveyor to the appropriate height.

3. Guide rail adjustment screws:

To adjust the width of the conveyor guides, loosen the knobs and adjust the position. Tighten after the desired width has been adjusted.